Using a Rotary Cutter
Rotary
cutters need to be used with a special cutting mat beneath the fabric –
This insures that as you move the cutter, it doesn't end up leaving a
mark or cut your cutting surface. These blades are very sharp and
cutting mats are available in many shapes, sizes and cost levels.
Make
sure your fabric is folded so the selvages are parallel with each
other. This is especially important if the fabric has been pre-washed or
came off the bolt wonky. It’s always a good idea to double check that
the fabric lays flat and doesn’t have a twisted look.
One thing
to watch out for is ruler creep. After cutting several strips or
sub-cuts, sometimes, you will see the ruler is no longer square on the
folded edge. That means it’s time for a new clean up cut.
Acrylic rulers (vs. Metal Yardsticks) are a must.
